Power Grid Failure – Bolton – 29/May/2018

At 11:15am, Bolton suffered a large power cut which caused a momentary loss of grid power to our DC.

This was handled by our UPS systems as expected and was brief enough to not require backup generation.

Electricity northwest (ENWL) are en-route to the area to investigate so a further grid outage may occur due to remedial work by them.

Our UPS and generator systems remain on standby and no mains failures to equipment should be expected.

(Note: customers with A and B feeds may notice outages on the ‘B’ feed as this is grid powered)


Bookmark the permalink.

Leave a Reply