Hello customer Outage time frame Friday, 9/9/2013 start time 2.58 pm fix time 3.03 pm Duration 5 minutes Description, Network BGP (border gateway protocol) instability. A small configuration change on the data switches combined with a flush of its routing tables let the network reconverge and should prevent any future… Continue reading
Today’s monthly on-load generator test passed as expected. The generator was started automatically after detecting the mains failure simulation switch, then ran on-load 09:28 – 9:48 The generator detected recovery of mains and shut down automatically in the expected timeframe All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 10:59 – 11:10 (During a ridiculously torrential downpour.) All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 14:26 – 14:43 All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 10:40 – 10:55 All measured values were within their normal ranges.
Today’s monthly on-load generator test passed as expected. The generator was started automatically after detecting the mains failure simulation switch, then ran on-load 10:20 – 10:49 The generator detected recovery of mains and shut down automatically in the expected timeframe All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 10:50 – 11:08 All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 11:10 – 11:25 All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 10:30 – 10:47 All measured values were within their normal ranges.
Today’s monthly on-load generator test passed as expected. The generator was started automatically after detecting the mains failure simulation switch, then ran on-load 09:46 – 10:03 The generator detected recovery of mains and shut down automatically in the expected timeframe All measured values were within their normal ranges.