Generator Test – BOL1
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 11:07 – 11:20 All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 11:07 – 11:20 All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 10:39 – 10:49 All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 10:14 – 10:24 All measured values were within their normal ranges.
Today’s monthly on-load generator test passed as expected. The generator was started automatically after detecting the mains failure simulation switch, then ran on-load 10:42 – 10:54 The generator detected recovery of mains and shut down automatically in the expected timeframe All measured values were within their normal ranges.
Today’s monthly on-load generator test passed as expected. The generator was started automatically after detecting the mains failure simulation switch, then ran on-load 09:45 – 10:00 The generator detected recovery of mains and shut down automatically in the expected timeframe All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 14:48– 14:59 All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 11:59 – 12:09 All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 13:56 – 14:09 All measured values were within their normal ranges.
Today’s routine generator test passed as expected. The generator was started manually, then run off-load 09:27 – 09:39 All measured values were within their normal ranges.
We experienced a fibre outage within the BT network this morning at 8:33am. There is a fibre break in one of our core ring circuits between Bolton and Manchester. Our network automatically failed over to its redundant path, and continues to operate normally. Once the fibre break has… Continue reading